Product profile

This product is made with epoxy-modified acrylic resin and made from special functional materials.

Product Use

It is widely used in advanced residential buildings, hotels, schools, hospitals.

Product characteristics

1. permeability, make medium and paint easier to brush;

2. excellent adhesion, extensive adhesion;

3. strong alkaline resistance, good waterproof performance, can prevent the surface paint fade and discoloration;

4. high cover force, can maximize the color and cover force of the paint, reduce the amount of paint;

5. water-borne health products, super clean taste, in line with environmental protection requirements;

6. construction has a high tolerance.

Product properties

Ingredients: Special epoxy-modified acrylic resin;

coating color and appearance: any color and coating appearance are normal

Shluster: Half light

Table stem time (h/25℃) ≤ 1

Painting consumption 10-12 ㎡ / L (dry film thickness 30um) (actual paint consumption will vary due to wall flatness and construction process;

Recoating time (25℃): over 2 hours (high humidity or low temperature should be extended).

Construction Suggestions

1. Surface Treatment: Before painting, the wall surface must be stable, clean, dry, smooth, and ash-free.Wall surface humidity shall be less than 10% (high adhesion drops, coating and foaming and flowering), PH shall be less than 10.

2. construction tools: paint brush, roller, high pressure gas spraying, sandpaper;

3. construction conditions: construction above 5℃ and relative humidity below 85%;

4. recommended brushing system: primer again;

5. dilution ratio: can add 10-15% water according to the construction viscosity, stir well after construction;

6. once should not be too thick, brush should be uniform, if necessary can be painted step by step;

7. The tools shall be cleaned with water immediately after construction.

Storage, packaging and management

Package: 20kg/ barrel, 5kg/ barrel,

Storage: stored in 0-35℃, cool and dry place, the remaining coating shall be sealed. If the product is opened and properly stored for 18 months. If the storage indicators meet the technical indicators of our company.

Note

1. Air circulation shall be maintained during  construction, and the coating shall be kept away from direct sunlight and heat source;

2. To avoid contamination with skin and eyes or inhaling excessive paint mist, please use masks, gloves and other protective equipment;

3. if stained with eyes, immediately clean with a large amount of water, and ask a doctor to treat;

4. places places where children cannot access;

5.This product is a pure water-based and environmentally friendly product, which should avoid organic solvent pollution.