This product uses modified silicone, natural stone and high performance additives.Can provide three-dimensional decorative effect of granite style.
It is widely used in the decoration and protection of concrete or cement exterior walls; suitable for residential buildings, hotels, office buildings, schools and factories; especially suitable for different curved walls.
1, can cover the small cracks on the wall, excellent outdoor weather tolerance and color protection;
2, can adjust surfaces with varying roughness and has the function of covering wall surface defects;
3, is mildew resistant, alkali resistant, chemical and weather resistant.
4, water-based environmental protection, convenient construction, only a single gun hole can be sprayed with multi-color, saving time and saving work.
Ingredients: silicone natural stone compound coating
Film color and appearance: various colors, film appearance is normal
Table stem time (h/25℃) ≤ 2
Painting consumption: 4-5kg/㎡ (the actual paint consumption will vary due to wall flatness and construction process;
Recoating time (25℃): over 24 hours (high humidity or low temperature should be appropriately extended).
1, Surface Treatment: Before painting, the wall surface must be stable, clean, dry, smooth, and ash-free.Wall surface humidity shall be less than 10% (high adhesion drops, film foaming and flowers), PH shall be less than 10.
2, construction tools: air compressor, single-hole spray gun, sponge roller, sandpaper;
3, construction conditions: construction above 5℃ and relative humidity below 85%;
4, recommended brush system: external wall anti-alkali closed primer once, real stone paint spraying 2 times, cover light paint spraying 1 times;
5, dilution ratio: the construction viscosity can be added a little water stirred evenly after the construction;
6, number of spraying: one spraying should not be too thick, if necessary can be sprayed multiple times;
7, The tools shall be cleaned with water immediately after construction.
Storage, packaging and management
Pack: 30kg/ barrel
Storage: stored in 0-35℃, cool and dry place, the remaining coating shall be sealed. If the product is opened and properly stored for 18 months. If the storage indicators meet the technical indicators of our company.
1, Air circulation shall be maintained during construction, and the coating shall be kept away from direct sunlight and heat source;
2, To avoid contamination with skin and eyes or inhaling excessive paint mist, please use masks, gloves and other protective equipment;
3, if stained with eyes, immediately clean with a large amount of water, and ask a doctor to treat;
4, places places where children cannot access;
5, is a pure water-based and environmentally friendly product, and should avoid organic solvent pollution.
WeChat public account