Product profile

This product is a pure water-based acrylic resin environmental protection coating, using imported silicone resin, additives; can provide the most realistic granite wool effect decorative effect.

Product Use

It is widely used in the decoration and protection of concrete or cement exterior walls; suitable for residential buildings, hotels, office buildings, schools and factories; especially suitable for different curved walls.

Product characteristics

1, can cover the tiny cracks of the wall.

2, can adjust surfaces with varying roughness and has the function of covering wall surface defects;

3, is mildew resistant, alkali resistant, chemical and weather resistant.

4, water-friendly, convenient construction, only colorful paint special spray gun can spray realistic imitation granite effect, saving time and work.

Product properties

Ingredients: silicone elastic coating

Film color and appearance: imitation granite various colors, coating appearance is normal

Shluster: matte

Table stem time (h/25℃) ≤ 2

paint consumption: 0.8-1.5kg/㎡ (actual paint consumption will vary depending on color density and construction process);

Recoating time (25℃): over 4 hours (high humidity or low temperature should be extended).

Construction Suggestions

1, Surface Treatment: Before painting, the wall surface must be stable, clean, dry, smooth, and ash-free.Wall surface humidity shall be less than 10% (high adhesion drops, film foaming and flowers), PH shall be less than 10.

2, construction tools: colorful paint special spray gun, air compressor, sponge roller, sandpaper;

3, construction conditions: construction above 5℃ and relative humidity below 85%;

4, suggested brush system: external wall anti-alkali closed primer once, middle paint 2 times, colorful water coated sand paint spraying 2-3 times, cover paint spraying 1 times;

5, number of spraying: one spraying should not be too thick, if necessary can be sprayed multiple times;

6, The tools shall be cleaned with water immediately after construction.

Supporting coating system