Product profile

The product uses modified acrylic resin, special functional facial fillings and additives, refined into the water-based environmentally friendly interior wall engineering latex paint.

Product Use

It is widely used in ordinary residential buildings, hotels, schools, hospitals and other large construction projects.

Product characteristics

1. Excellent cover force;

2. Good flow smoothness;

3. has excellent water resistance;

4. water-borne health products, super clean taste, in line with environmental protection requirements;

5. construction tolerance, paint film excellent scrubbing performance, lasting decorative effect.

Product properties

Ingredients: silicone modified acrylic latex paint;

Film color and appearance: white and normal film appearance

Shluster: matte

Pratio: ≥ 0.93

Table stem time (h/25℃) ≤ 1

Brush resistance: ≥ 3000

Painting consumption: 8-9 ㎡ / L (dry film thickness of 30um) (the actual paint consumption will vary due to wall flatness and construction process;

Recoating time (25℃): over 2 hours (high humidity or low temperature should be extended).

Construction Suggestions

1. Surface Treatment: Before painting, the wall surface must be stable, clean, dry, smooth, and ash-free.Wall surface humidity shall be less than 10% (high adhesion drops, coating and foaming and flowering), PH shall be less than 10.

2. construction tools: paint brush, roller, high pressure gas spraying, sandpaper;

3. construction conditions: construction above 5℃ and relative humidity below 85%;

4. recommended brush system: inner wall anti-alkali closed primer once, face paint 2-3 times;

5. dilution ratio: depending on the construction viscosity can add a small amount of (5-10%) water to stir evenly after the construction;

6. once painted brush should not be too thick, if necessary can be painted step by step;

7. The tools shall be cleaned with water immediately after construction.

Supporting coating system